Avalon RF RT423 Bedienungsanleitung PDF herunterladen (Seite 15)

AVALON RF, INC. Page 13 of 15

ODX402/ ODX502/ OODX602 User’s Guide & Operating Manual

The power on/off switch controls power to the unit. It is an electronic

switch & must be kept pressed for 3 sec.

3.2 Operating the ODX602.

The ODX602 has the following user controls/ functions:

3.2.1 Power On/Off

The ODX602 has a electronic on/off switch. The switch must be held

pressed for at least 3 sec to turn the unit on or off. This shuts off

power to the entire receiver. The on condition is indicated by the

power led glowing red.

3.2.2 Channel selection

Select the desired channel by pressing the switch. A tactile feedback

gives indication of the switch press.

3.2.3 Bank Select Switch

This switch has a toggle function. At power on, it is ‘off’ indicating that

the channel bank 0-7 has been selected. When pressed, the green

led above it glows indicating that channel bank 8-F is now selected.

Pressing the switch again will turn off this selection.

3.2.4 OSD Menu

The OSD Menu brings up the ‘on-screen display’. At power on, the

default mode is – OSD OFF. It has 4 modes that it cycles through on

each key press – ID mode, Quality mode, Audio Volume and OSD

OFF.

The ID mode shows the SID (service ID) of the received channel, the

channel’s frequency & an indication of the rf signal level together with

a signal quality red/green indication.

1 2 ... 10 11 12 13 14 15 16 17

Keine Kommentare

Avalon RF RT423 Bedienungsanleitung Seite 15